Air quality monitors are tools for air quality professionals and enthusiasts alike to gather real-time information on the surrounding air. They are a flexible air quality monitoring solution that can be configured with 30+ different gases(depend on requirement ) sensors and particle sensors for a range of uses from environmental monitoring to industrial applications.A complete ambient air monitoring station for a wide range of particulate and gaseous pollutants and environmental conditions.

A weather station is a facility equipped with instruments and sensors that measure various atmospheric parameters such as temperature, humidity, pressure, wind speed and direction, precipitation, and solar radiation. These measurements are used to provide real-time and historical weather data that are important for a range of applications including weather forecasting, climate monitoring, agriculture, aviation, and emergency management.

We have developed its new and advance Multi parameter air sampler. With the feature of simultaneous sampling of PM 10, PM 2.5, and four different water solu blegases.We uses USEPA designed PM 2.5 Impactor with dual stage Imp actor. PM 10 is sampled through EN12341 low flow impactor. Four different independently controlled gases can be sampled in glass impinge in a gaseous sampling attachment through wet chemical method.All the parameters are sampled at a time with each technology approved from international bodies for environmental sampling like European union,CPCB andUSEPA.

A flue gas analyzer, often simply referred to as a gas analyzer or emissions analyzer, is a device used to measure and analyze the composition of gases emitted from combustion processes, particularly from furnaces, boilers, and other combustion systems. These devices are essential tools for monitoring and controlling emissions in various industries, including power generation, industrial processes, and environmental compliance. Here are some key aspects of flue gas analyzers.
Parameters O2, CO2, CO, NO2, SO2, Particulate matter etc.

A Continuous Emission Monitoring System (CEMS) is an essential tool for monitoring and reporting air emissions from industrial sources. It continuously measures various pollutants released into the atmosphere, such as sulfur dioxide (SO2), nitrogen oxides (NOx), carbon monoxide (CO), and particulate matter. CEMS helps industries comply with environmental regulations, ensures air quality standards are met, and provides real-time data for decision-making.

A noise level meter, also known as a sound level meter, is a device that measures the intensity or level of sound in a given environment. It is commonly used in occupational safety and health, environmental monitoring, and industrial and residential noise control.

The principle of tribo-electric dust measurement is that whenever a dust particle hits an electrically loaded metal stick, which has been placed across a flue gas duct, the charge of the metal stick is changed. The more dust particles hitting the stick per time unit, the more it influences the metalstick.

The scattered light meters are delivered with the sender and receiver units gathered in one unit. Light is sent into the process by a well-defined angle in relation to the flow direction. The sender/receiver unit is also installed in a well-defined angle in relation to the flow direction.

Online Water Analyzer based on UV absorption, which has found increasingly wide application in process industries The UV source is a Xenon flash lamp specified for 109 flashes that corresponds to more than years of life time with one measurement every minute. Physic-chemical measurements like pH, ORP, dissolved oxygen; conductivity can be added to the internal measurements by using external probes. The dissolved oxygen probe is based on fluorescence method for a lower maintenance and higher stability.

A digital water level recorder is a device used to measure and record the depth of groundwater at a specific location over time. These recorders are equipped with sensors or transducers that can detect the water level and convert it into digital data. This data is typically stored electronically and can be retrieved for analysis and decision-making.

Electromagnetic Flow meters are based on Faraday's Law of Electromagnetic Induction. In an Electromagnetic Flow meter, the magnetic field is generated by a set of coils. As the conductive liquid passes through the electromagnetic field, an electric voltage is induced in the liquid, which is directly proportional to its velocity.

The Internet of things (IOT) describes physical objects (or groups of such objects) with sensors processing ability, software and other technologies that connect and exchange data with other devices and systems over the Internet or other communications networks. Internet of things has been considered a misnomer because devices do not need to be connected to the public internet, they only need to be connected to a network and be individually addressable.

The Central Ground Water Board (CGWB) in India is an organization responsible for the management and regulation of groundwater resources in the country. They employ various tools and technologies, including digital water level recorders, to monitor and manage groundwater levels.

A vortex flow meter is a type of flow measurement instrument that uses the principle of the Von Karman vortex street to measure the flow rate of fluids, such as liquids, gases, and steam. It is commonly used in industrial processes and applications where accurate flow measurement is critical. The device typically consists of a bluff body, also known as a shedder bar, mounted in the flow stream.

Radar-based level and velocity instruments are devices that use radar technology to measure the level or depth of a substance (such as liquid or granular materials) and, in some cases, the velocity of the substance's movement.